3D print cost calculator

Work out what a print costs you and what to charge for it. Free, with no account.

These are sample rates. Use your own.

Only the symbol changes. Enter every price in this currency.

Filament
Printer
Electricity and labor
Pricing

Result

Suggested price per piece

$7.74

Profit per piece

$2.58

33% of the price

Cost of each part
CostPer piece
Material$2.02
Electricity$0.07
Printer wear$0.77
Labor$2.00
Failed prints (waste)$0.10
Overhead$0.20
Total cost$5.16

How the math works

A piece costs the sum of six parts. Failed prints (waste) and overhead are a percent of the material cost, the same way a FoxTrack quote adds them.

Material
grams used × (filament price per kg ÷ 1000)
Electricity
printer watts ÷ 1000 × print hours × price per kWh
Printer wear
printer price ÷ lifespan hours × print hours
Labor
labor minutes ÷ 60 × labor rate per hour
Failed prints (waste)
material × failed prints (waste) %
Overhead
material × overhead %

The price is the cost plus your markup: cost × (1 + markup %). The markup is your profit on the piece.

Example: a vase uses 84 g of PETG at $24 a kg. It prints for 3.2 hours on a 140 W printer that cost $1,200 and lasts 5,000 hours. Power is $0.15 a kWh, and you spend 6 minutes on it at $20 an hour.

Material is $2.02, electricity $0.07, printer wear $0.77 and labor $2.00. Failed prints at 5% add $0.10 and overhead at 10% adds $0.20. The cost is $5.16. A 50% markup adds $2.58, so the price is $7.74.

Questions

How much should I charge for a 3D print?

Charge more than the print costs you. Add material, electricity, printer wear and your time, add an allowance for failed prints, then add a markup that pays for rent, fees and profit. In the worked example the cost is $5.16 and a 50% markup gives a price of $7.74. Tax, shipping and payment fees are not included.

What is the hourly rate of a 3D printer?

Add the electricity and the wear for one hour of printing. A 140 W printer at $0.15 a kWh uses $0.021 of power an hour. A $1,200 printer that lasts 5,000 hours wears $0.24 an hour. That is $0.261 an hour, before labor, rent and repairs. Multiply it by the print time, or enter the printer price and lifespan in the calculator.

What markup should I use?

Markup is a share of cost, so profit is a smaller share of the price. A 50% markup leaves 33% of the price as profit, and a 100% markup leaves 50%. Choose a markup that covers what the calculator leaves out, such as rent, software and payment fees, and still leaves a profit. To get a number, add up those monthly costs and divide by the pieces you sell in a month.

Should I charge for failed prints?

Yes. A failed print uses filament, power and printer time, and no customer pays for it unless your prices cover it. The Failed prints (waste) field adds a share of the material cost to every piece. At 5% it adds $0.10 to a piece with $2.02 of material. Raise the percent if more of your prints fail.

How much of the cost is electricity?

Electricity is the printer's power in kilowatts, times the print hours, times the price per kWh. A 140 W printer running 3.2 hours uses 0.45 kWh, which is $0.07 at $0.15 a kWh. That is 1% of the $5.16 cost in the example. Change the watts, hours and price in the calculator to see your own share.

FoxTrack prices a quote this way

On a FoxTrack quote line you pick a printer, a filament and the print hours. FoxTrack works out the cost from your own filament prices and printer details, adds your waste, overhead and markup, and prices the line. You set the electricity rate, labor rate and percentages once, under Settings → Quoting and tax.

When the customer accepts, the quote becomes an order in one step, or goes straight to an invoice. Quotes are on every plan, and the Free plan includes 3 new quotes each month. The help page on quotes has the details.

Run your print shop on FoxTrack

Orders, quotes, invoices, stock and live printer status. Made by a print shop.

Free plan · No card needed